2 thoughts too "Direct "HA Edition" with Monacor SPH-176 MSH-116 and DT25-NImproved edition of the center speaker "Monacor Direct""
Now I have to deliver the long overdue Rezi!
Shortly after Alex started developing the center, I was in a hurry to see if he sounded different or better than the original circuitry. I do not have the problem of the angles, because the listening position is no + -15Grad away from the axis.
The original circuit harmonized better with my floor speakers than any solutions before! I also knew everything in the Alex Part 1 wrote after accomplish.
After a few phone calls and more Mails I got a somewhat stripped down, but no less expensive, circuit of Alex including component delivery. Slimmed for the sake of the small angle.
After a few months of listening, I have to say that the center integrates perfectly, it now sounds more airy and suits the AX-80 better. The MT now works as such, which can be heard somehow. The sound from> 30 degrees is still acceptable without any compromises.
If a sound goes from left to right across the center you can still hear a small difference, but this is not as big as before. 3x front equal is generally recommended.
In short: I am thrilled, only a little color is missing! It must also be said that the volume is a bit smaller with me so that the whole optically fits under the TV: https://picasaweb.google.com/105465363015031999106/AkustischerSelbstbau?noredirect=1#5693426536763981650
The center was also measured by a friend, the curves are Alex!
Thanks for your feedback.
Short for the inclined reader: Ingo asked for a simpler turnout, which makes the MT fully integrated but maybe makes a few small cuts at angles> 30 °.
Now I have to deliver the long overdue Rezi!
Shortly after Alex started developing the center, I was in a hurry to see if he sounded different or better than the original circuitry. I do not have the problem of the angles, because the listening position is no + -15Grad away from the axis.
The original circuit harmonized better with my floor speakers than any solutions before! I also knew everything in the Alex Part 1 wrote after accomplish.
After a few phone calls and more Mails I got a somewhat stripped down, but no less expensive, circuit of Alex including component delivery. Slimmed for the sake of the small angle.
After a few months of listening, I have to say that the center integrates perfectly, it now sounds more airy and suits the AX-80 better. The MT now works as such, which can be heard somehow. The sound from> 30 degrees is still acceptable without any compromises.
If a sound goes from left to right across the center you can still hear a small difference, but this is not as big as before. 3x front equal is generally recommended.
In short: I am thrilled, only a little color is missing! It must also be said that the volume is a bit smaller with me so that the whole optically fits under the TV:
https://picasaweb.google.com/105465363015031999106/AkustischerSelbstbau?noredirect=1#5693426536763981650
The center was also measured by a friend, the curves are Alex!
Hello Ingo
Thanks for your feedback.
Short for the inclined reader: Ingo asked for a simpler turnout, which makes the MT fully integrated but maybe makes a few small cuts at angles> 30 °.
I am glad that you are satisfied with the result.
gruß
Alexander