Datasheet © www.heissmann-acoustics.de | |||||||||||||
Measurements in 20x40cm baffle, 10mm rounded, in 70cm distance at 2,83V. Level scaled to 1m.
The Waveguide was milled with a CNC adapter plate mounted on the tweeter. |
|||||||||||||
|
|||||||||||||
XT25TG-30 / 04 Sound pressure at angles |
System-related exaggeration in the frequency band of 1-7 kHz. Due to its symmetry, this can be easily equalized with the crossover. It is the purpose of a sound guide to act as an acoustic amplifier. The Vifa XT-300 (XT25TG-30/04) is an excellent match for the waveguide. Extremely even bundling without any disturbances worth mentioning. Due to the large dome (30mm voice coil), a slightly stronger directivity from 8kHz. Recommendation: plan a slight increase> 8kHz in the high frequency on axis. | ||||||||||||
XT25TG-30 / 04 Sound pressure standardized at angles to 0 ° |
Here, the frequency response was linearized on axis. The 2. Picture (sonogram) clearly shows the excellent uniform straightening behavior of the combination of XT-300 and the waveguide. | ||||||||||||
XT25TG-30 / 04 decay behavior |
Minimal delayed decay by 2kHz. Otherwise perfectly. | ||||||||||||
XT25TG-30 / 04 harmonic distortions
|
As expected, the distortion decreases compared to the variant without waveguide. The XT-300 already showed very good distortion even without waveguide, but with a significant increase of K2 under 3kHz. With Waveguide the effect is also present but attenuated by about 5dB. In sum, very low distortion. Even with 100dB, everything from 2kHz remains below 1%. K3 moves at the measurable limit. | ||||||||||||
Rating
|
ConclusionThe Peerless XT25TG-30/04 and the Waveguide WG-300 are a very attractive combination for extremely level-stable installations, for example in the home theater. Can be used from 1,5 kHz. I think I'll test it out in Cinetor. |
||||||||||||